Office / Computer Chair Recliner

The ad states :-    Height adjustable with reclining function. Seat back can be adjusted and locked in tilted position.

That could be taken to mean only locked in fully tilted position, as opposed to multiple tilted position. Some seats – I have been looking around for one for a while, to go with my new desk – have a rocking motion of 15 degrees. With this funciton the back and seat stay in the same position in regard to each other but rock back and forwards by 15 degrees.

Your handle has written on it ” push in /tilt lock” and “pull out/tilt release”. Again that could mean both scenarios. Only locked at either extreme, or locked in multiple positions between. Only the vendor can definiotively answer that one.

THIS is what I’ve been looking to get.

I don’t know what the button is for on the right, if you have  get one please tell and maybe if you get it to stop clunky thump.

Will do. Things are all on a schedule here at the moment, once the front wall is finished we’re getting the lounge floor sanded and lacquered.

Then the computer desk, then the chair. The en-suite is the one room we have hardly touched in 10 years and now needs re-furbing.

We’ve changed the window, next the old tiles off the wall, then it’s in with a new bath and suite, new floor, lights and extractor.

One of the garden sheds ( our old beach hut ) needs moving to the back of the garden, so while the guy’s doing the front wall we’re using the cement mixer to lay a solid concrete base for it, raise it off the floor on some second hand scaffold boards split down the middle. Then it and the other sheds need staining. Once that’s done it’ll be time to start on the garage.

It’s nice being retired……………… isn’t it??? Mightn’t it be??? One day!!!! Please….!!

JB that activity is the cause of several deep cuts on my fingers, worst on my right thumb, into the quick of the thumbnail and index finger. To ‘save money’ on the cost of new lounge carpet, SWMBO pressured persuaded me to take up the old carpet, underlay and gripper. Problem was that a previous carpet fitter had hammered some really hard nails into the underlying tile floor. It was removing these which abused my poor digits. The margins of the ceramic tile floor are all damaged by the nails and their removal by me, but the new carpet fitter managed to lay down some stuff which took the new gripper and the carpet hid the damage. I don’t want to have to do that again! It does look good now though.

This is just one area of damage, all round the margins is the same.

I cut up the old carpet, gripper and underlay with my trusty Stanley knife. A new neighbour is building a shed/workshop and has spent a bomb on a kit he bought on the net. He has got about 25% of the build done but keeps stopping for a couple of days, every time he has left it over the last 2 days of high winds, off comes the tarpaulin. The shed kit includes an insulated base and more for the walls. I offered him the underlay for more insulation, he refused politely. Says he was an office worker before retirement and the way he is working, I believe him. No offence to office workers, did that myself once in between other work. Least interesting working period of my life.

The old carpet & underlay is now landfill, no one wanted it. I denailed the gripper and took it to the Waste dump.So much for recycling!